How can the probe of the 3.0mm diameter side view endoscope camera be effectively prevented from being damaged? The 3.0mm diameter side view endoscope camera plays a very important role in the industry and is indispensable. The 3.0mm diameter side view endoscope camera probe is the core component, and it is carefully cared for when using traditional Chinese medicine. Then, how to protect the 3.0mm diameter side view endoscope camera probe to avoid damage? Beijing 3.0mm diameter side view endoscope camera brand Shenzhou Mingda Technology Xiaobian is You answer:
1. Use an appropriate method to smoothly deliver the probe to the location of the object to be inspected to avoid damage to the probe
For endoscopic inspection, since the inspection of pipelines accounts for more than half of the total non-destructive inspection workload, the following takes pipeline inspection as an example for description. The larger the diameter of the probe, the longer the length, the smaller the gap after entering the pipeline, the easier it is to block the entry and exit of the pipeline, and the more likely it is to get stuck and damage the probe. Therefore, when feeding the probe during the detection process, the action should be slow and careful. , to ensure that the probe reaches the designated part smoothly. If the probe encounters obvious resistance in the process of advancing, it should stop advancing immediately, remove the resistance and then advance, and do not pull it hard. For the same reason, the probe should be moved slowly and cautiously when withdrawing.
2. After completing the inspection task, timely storage and regular maintenance
After completing the inspection task, it is recommended to clean the 3.0mm diameter side view endoscope camera line and probe, and then place each component in the box that comes standard with the purchase of the endoscope to protect the probe and facilitate the next use. In addition, the 3.0mm diameter side view endoscope camera probe should also be regularly maintained to find faults in time and handle them correctly, which will help prolong the service life of the probe.
3. Use the correct way to replace the lens
The angle of view of the probe refers to the angle of the maximum observation range of the probe. The size of the angle of view is determined by the lens group on the probe. They are usually installed at the front end of the probe by double-threaded, screw-plus-external lock and other double connection methods. The 3.0mm diameter side view endoscope camera, especially the video endoscope, can change the viewing direction and angle by changing different conversion lenses. Therefore, if the lens needs to be replaced during the inspection process, it must be replaced correctly according to the interface method, and the installation is firm. , to avoid the lens falling off and damage in the subsequent inspection process.
3.0mm diameter side view endoscope camera https://www.hengal-tech.com/3-0mm-side-view-endoscope-camera-diameter-3-0mm-pshow/14.html
